| Category: Helium, SF6 Gas Recovery Plant > SF6 Recovery Plant > |
LC-300
Specification for SF6 reclamation device:
1.HC series( high pressure reclamation)
Scope: Mainly aimed at the maintenance for a few switch electric equipments, the reclamation amount is limited.
Feature: Liquefaction at high pressure
|
Type |
Liquid storage |
Reclamation speed |
Vacuum pumping speed |
|
HC-30 |
30kg |
4m3/h |
14 |
|
HC-50 |
50kg |
14 |
2.LC series( low pressure reclamation)
Scope: Mainly aimed at the repeated maintenance for large-scale GIS switch electric equipments, the reclamation amount is relatively large.
Feature: Frozen liquefaction at low pressure
|
Type
|
Liquid storage
|
Reclamation speed
|
Vacuum pumping speed
(L/S) |
|
LC-100
|
100kg
|
12m3/h
|
28
|
|
LC-150
|
150kg
|
12m3/h
|
54
|
|
LC-200
|
200Kg
|
12m3/h
|
54
|
|
LC-250
|
250Kg
|
24m3/h
|
54
|
|
LC-300
|
300Kg
|
24m3/h
|
100
|
|
LC-500
|
500Kg
|
24m3/h
|
LC-300 SF6 Liquefaction Reclamation(Gas Filling) Device
One. Functions and uses:
LC series SF6 gas reclamation and filling device is mainly used in power transmission engineering company, electric power plant, extra-high voltage transformer substation and SF6 electrical appliances switches manufacturers etc., it is adopted as an auxiliary equipment in installation, debugging and maintenance of SF6 electrical appliances, such as GCBP, GCBT and GIS etc.
For the electrical appliances mentioned above, the device can be used for vacuum pumping, reclamation and purification (remove the super scale water, oil and dirt etc.), and it can also be used in vacuum pumping and reclamation of other rare gases.
For the electrical appliances mentioned above, the device can be used for vacuum pumping, reclamation and purification (remove the super scale water, oil and dirt etc.), and it can also be used in vacuum pumping and reclamation of other rare gases.
Two. Features:
1. Pumping SF6 gas from SF6 equipments.
2. Making the pumped gas liquefaction and storage.
3. Pumping the air and water after the maintenance of SF6 equipments.
4. Recycling, drying and purifying the stored SF6 gas.
5. Gasifying the stored SF6 gas and transporting to SF6 equipments.
6. Vacuum pumping the gas reclamation and storing tank as well as the pipeline system.
7. Transporting the liquefied SF6 among gas bottle, storing tank and outer storing tank.
8. It has adopted international advanced frozen liquefaction method, which will reduce the working pressure of system and improve the working efficiency of reclamation.
9. Equipped with the dry filter with the regeneration function, the water content will be less than 10PPM(volume ratio)
10. It can fill the SF6 gas into steel bottle after its liquefaction, the storing capacity of standard will not less than 300Kg.
11. Processing diagram is shown on the operation panel, easy and clear operation.
12. 3-phase power supply in electric system can be confirmed and adjusted automatically without phase change.
13. Wind-cooling and mobile type is adopted; the machine can work without water resources.
Three. Performance indexes of device:
|
Type
|
Frozen liquefaction，mobile by hand
|
Remarks
|
|
|
Working environment temperature
|
-20℃-40℃
|
|
|
|
Reclamation
|
Initial pressure (MPa)
|
0.75
|
|
|
Ultimate pressure(Pa)
|
≤1000
|
|
|
|
Time for 1m3 volume（Min）
|
≤40
|
|
|
|
Gas filling
|
Initial pressure（Pa）
|
≤1000
|
|
|
Ultimate pressure (MPa)
|
0.75
|
|
|
|
Time for 1m3 volume（Min）
|
≤20
|
|
|
|
Vacuum evacuating
|
Initial pressure (MPa)
|
0.1
|
|
|
Ultimate pressure (Pa)
|
≤133
|
|
|
|
Time for 1m3 volume（Min）
|
≤50
|
|
|
|
Ultimate vacuum（Pa）
|
≤10
|
|
|
|
Annual leakage rate
|
≤1%
|
|
|
|
Purification
capacity
|
Water content（PPM/G）
|
≤15
|
|
|
Oil content（PPM/G）
|
≤10
|
|
|
|
Acid value（PPM/G）
|
≤0.3
|
|
|
|
Granule filtration （μm）
|
≤1
|
|
|
|
Storage vessel
|
Storage type
|
Liquid
|
|
|
Pressure (MPa)
|
4.0
|
||
|
Effective volume(L)
|
300
|
||
|
Liquid storage(Kg)
|
300
|
||
|
Type of liquefaction
|
Frozen
|
|
|
|
Regeneration type of dry filter
|
Vacuum active regeneration
|
|
|
|
Noise(dB)
|
≤75
|
|
|
Four. Technical Parameters of Main Parts:
|
Name
|
Main components
|
Type
|
Technical parameters
|
Manufacturer
|
Remarks
|
|
Reclamation
system
|
Compressing
system
|
4DC-7.2
|
26.84M 3/H
|
Beijing, Bitzer
|
Wind cooling
|
|
Vacuum evacuating
system
|
Vacuum pump
|
SV-65B
|
65M 3/H
|
LEYBOLD
|
Wind cooling
|
|
Roots pump
|
ZJY-70B
|
70L/S
|
Shanghai, Sunny
|
Wind cooling
|
|
|
Vacuum gauge
|
|
0-0.1Pa
|
Chengdu,
Swip
|
Digital
|
|
|
Purification
System
|
Tiny oil mist
filter
|
0715-6
|
Water content（PPM/G）≤15
Oil content（PPM/G）
≤10
Acid value（PPM/G）
≤0.3
Granule （μm）
≤1
|
America,
HANKISON
|
Imported originally
|
|
Filters for impurities/water content/fluorid
|
Ball gel
|
Dalian, Fengying
|
Three stage purification in series
|
||
|
FY-102 active alumina
|
|||||
|
KDHF-03
|
|||||
|
Cooling system
|
Compressing
units
|
2FC-2.2
|
2.7 KW
|
America, Tekcom
|
Wind cooling
|
|
Instrument
|
|
|
|
Germany,
WIKA
|
|
|
Pipeline system
|
Pipeline
|
DN10/25
|
|
Chongqing,
Fengyu
|
Purple bronze
|
|
Valve
|
DN10/25/6.0
|
High vacuum/moderate pressure
|
Shanghai,
Leihi
|
Stainless steel
|
|
|
Electrical controlling system
|
button
|
|
|
Shanghai, China
|
|
|
Indicating light
|
|
|
Shanghai, China
|
|
|
|
Contactor
|
|
|
ABB
|
|
